Skip to Content

Occupational Safety and Health

OSHA 511 - Occupational Safety and Health Standards for General Industry

FPM-40366

This course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

Course Information

In-Person
Live Online
3.00 units
$795.00
Notes: Beginning September 1, 2024, the VILT (Virtual Instructor Led Training) classes at the UC San Diego OTIEC are available to anyone who lives or works in the newly realigned OSHA San Francisco Region: Alaska, American Samoa, Arizona, California, Commonwealth of the Northern Mariana Islands, Guam, Hawaii, Idaho, Nevada, Oregon and Washington.

Additionally, if you are a current Outreach Trainer with UCSD, regardless of your residence, you are still eligible to attend a Trainer Update Course (OSHA 502, OSHA 503, OSHA 5402).

Course sessions

Closed

Section ID:

181767

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • Early enrollment advised
  • No refunds after: 9/16/2024

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 9/30/24-10/3/24

Schedule:

Date Day Start End
9/30/2024 Mon 9:00 a.m. 4:30 p.m.
10/1/2024 Tue 9:00 a.m. 4:30 p.m.
10/2/2024 Wed 9:00 a.m. 4:30 p.m.
10/3/2024 Thu 9:00 a.m. 4:30 p.m.
Closed

Instructor: Kenneth Keberle, CSP; ASP; CHST; CIT

Kenneth Keberle, CSP; ASP; CHST; CIT
Closed

Section ID:

181786

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • Early enrollment advised
  • No refunds after: 10/7/2024

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 10/21/24-10/24/24

Schedule:

Date Day Start End
10/21/2024 Mon 9:00 a.m. 4:30 p.m.
10/22/2024 Tue 9:00 a.m. 4:30 p.m.
10/23/2024 Wed 9:00 a.m. 4:30 p.m.
10/24/2024 Thu 9:00 a.m. 4:30 p.m.
Closed

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has over 30 years occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona. Starting as a compliance officer, Norton worked his way up to assistant director for the agency, with oversight for all training, consulting and voluntary protection programs within Arizona, and compliance activity in the Southern part of the state. Norton is the principle consultant for Norton Safety Services traveling across the country to deliver his message of safety excellence. He is also a published author of two books on Occupational Safety & Health, and has a master’s in organizational management.

Full Bio
Closed

Section ID:

181819

Class type:

This is a traditional classroom setting.

All class meetings held in-person according to published location, dates and times. Students may be expected to engage with course content online during the published course dates.

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 11/4/2024

Note:

This class will be In-Person at UCC San Diego. Dates 11/18 - 11/21 8am - 4:30pm 6256 Greenwich Dr San Diego, CA 92122 Room number- TBD

Schedule:

Date Day Start End Location
11/18/2024 Mon 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
11/19/2024 Tue 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
11/20/2024 Wed 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
11/21/2024 Thu 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
Closed

Instructor: John Marsden, CHST, COSS, CET

John Marsden, CHST, COSS, CET

John has instructed health and safety classes for over 15 years to a wide range of construction crafts all over the country.

John Marsden has been with the UC San Diego OSHA Training Institute Education Center since 2013. He teaches the Safety Leadership courses and OSHA standards and trainer courses.

John's career includes over 20 years as a union steamfitter. He worked mostly as HVAC assistant service manager for 3 different companies over 15 years. Additionally, John is a Nuclear trained Submarine qualified U.S. Navy veteran.

He taught for 20 years as an apprenticeship and journeyman for United Association District Council 16. He also instructed safety and health for United Association as a Master Safety Instructor. John is the owner and lead instructor of Marsden Master Safety Training.

John is a certified Construction Health and Safety Technician (CHST) and a Certified Instructional Trainer (CIT) as well as being a Certified Occupational Safety Specialist (COSS) and Certified Occupational Safety Manager (COSM). John is a NESHA Master Instructor and Master Safety Professional. He has held a California vocational state teaching credential.

Full Bio
Closed

Section ID:

181825

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • Early enrollment advised
  • No refunds after: 11/19/2024

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 12/03/24-12/06/24

Schedule:

Date Day Start End
12/3/2024 Tue 9:00 a.m. 4:30 p.m.
12/4/2024 Wed 9:00 a.m. 4:30 p.m.
12/5/2024 Thu 9:00 a.m. 4:30 p.m.
12/6/2024 Fri 9:00 a.m. 4:30 p.m.
Closed

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has over 30 years occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona. Starting as a compliance officer, Norton worked his way up to assistant director for the agency, with oversight for all training, consulting and voluntary protection programs within Arizona, and compliance activity in the Southern part of the state. Norton is the principle consultant for Norton Safety Services traveling across the country to deliver his message of safety excellence. He is also a published author of two books on Occupational Safety & Health, and has a master’s in organizational management.

Full Bio
Add To Cart

Section ID:

186425

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 1/7/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 1/21/25-1/24/25

Schedule:

Date Day Start End
1/21/2025 Tue 9:00 a.m. 4:30 p.m.
1/22/2025 Wed 9:00 a.m. 4:30 p.m.
1/23/2025 Thu 9:00 a.m. 4:30 p.m.
1/24/2025 Fri 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Kenneth Keberle, CSP; ASP; CHST; CIT

Kenneth Keberle, CSP; ASP; CHST; CIT
Add To Cart

Section ID:

186440

Class type:

This is a traditional classroom setting.

All class meetings held in-person according to published location, dates and times. Students may be expected to engage with course content online during the published course dates.

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 1/13/2025

Schedule:

Date Day Start End Location
1/27/2025 Mon 8:00 a.m. 4:30 p.m. Room 1, ADOSH, 2675 E Broadway Blvd., Tucson
1/28/2025 Tue 8:00 a.m. 4:30 p.m. Room 1, ADOSH, 2675 E Broadway Blvd., Tucson
1/29/2025 Wed 8:00 a.m. 4:30 p.m. Room 1, ADOSH, 2675 E Broadway Blvd., Tucson
1/30/2025 Thu 8:00 a.m. 4:30 p.m. Room 1, ADOSH, 2675 E Broadway Blvd., Tucson
Add To Cart

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has over 30 years occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona. Starting as a compliance officer, Norton worked his way up to assistant director for the agency, with oversight for all training, consulting and voluntary protection programs within Arizona, and compliance activity in the Southern part of the state. Norton is the principle consultant for Norton Safety Services traveling across the country to deliver his message of safety excellence. He is also a published author of two books on Occupational Safety & Health, and has a master’s in organizational management.

Full Bio
Add To Cart

Section ID:

186433

Class type:

This is a traditional classroom setting.

All class meetings held in-person according to published location, dates and times. Students may be expected to engage with course content online during the published course dates.

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 1/20/2025

Schedule:

Date Day Start End Location
2/3/2025 Mon 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
2/4/2025 Tue 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
2/5/2025 Wed 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
2/6/2025 Thu 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
Add To Cart

Instructor: Charles Geraci

Charles Geraci

Charles Geraci is in charge of the Facility Safety Program at Pfizer Pharmaceuticals Inc. La Jolla site as well as responsible for the Crisis Management/Business Continuity and Security Programs. Charles has over 20 years of professional experience in the Environmental Health & Safety (EHS) field and received his bachelor's degree in Occupational Safety Sciences from Indiana University of PA.

Full Bio
Add To Cart

Section ID:

186499

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 2/10/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 2/24/25-2/27/25

Schedule:

Date Day Start End
2/24/2025 Mon 9:00 a.m. 4:30 p.m.
2/25/2025 Tue 9:00 a.m. 4:30 p.m.
2/26/2025 Wed 9:00 a.m. 4:30 p.m.
2/27/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has over 30 years occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona. Starting as a compliance officer, Norton worked his way up to assistant director for the agency, with oversight for all training, consulting and voluntary protection programs within Arizona, and compliance activity in the Southern part of the state. Norton is the principle consultant for Norton Safety Services traveling across the country to deliver his message of safety excellence. He is also a published author of two books on Occupational Safety & Health, and has a master’s in organizational management.

Full Bio
Add To Cart

Section ID:

186491

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 3/3/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 3/17/25-3/20/25

Schedule:

Date Day Start End
3/17/2025 Mon 9:00 a.m. 4:30 p.m.
3/18/2025 Tue 9:00 a.m. 4:30 p.m.
3/19/2025 Wed 9:00 a.m. 4:30 p.m.
3/20/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: John Marsden, CHST, COSS, CET

John Marsden, CHST, COSS, CET

John has instructed health and safety classes for over 15 years to a wide range of construction crafts all over the country.

John Marsden has been with the UC San Diego OSHA Training Institute Education Center since 2013. He teaches the Safety Leadership courses and OSHA standards and trainer courses.

John's career includes over 20 years as a union steamfitter. He worked mostly as HVAC assistant service manager for 3 different companies over 15 years. Additionally, John is a Nuclear trained Submarine qualified U.S. Navy veteran.

He taught for 20 years as an apprenticeship and journeyman for United Association District Council 16. He also instructed safety and health for United Association as a Master Safety Instructor. John is the owner and lead instructor of Marsden Master Safety Training.

John is a certified Construction Health and Safety Technician (CHST) and a Certified Instructional Trainer (CIT) as well as being a Certified Occupational Safety Specialist (COSS) and Certified Occupational Safety Manager (COSM). John is a NESHA Master Instructor and Master Safety Professional. He has held a California vocational state teaching credential.

Full Bio
Add To Cart

Section ID:

188061

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 3/17/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 3/31/25-4/3/25

Schedule:

Date Day Start End
3/31/2025 Mon 9:00 a.m. 4:30 p.m.
4/1/2025 Tue 9:00 a.m. 4:30 p.m.
4/2/2025 Wed 9:00 a.m. 4:30 p.m.
4/3/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has over 30 years occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona. Starting as a compliance officer, Norton worked his way up to assistant director for the agency, with oversight for all training, consulting and voluntary protection programs within Arizona, and compliance activity in the Southern part of the state. Norton is the principle consultant for Norton Safety Services traveling across the country to deliver his message of safety excellence. He is also a published author of two books on Occupational Safety & Health, and has a master’s in organizational management.

Full Bio
Add To Cart

Section ID:

188165

Class type:

This is a traditional classroom setting.

All class meetings held in-person according to published location, dates and times. Students may be expected to engage with course content online during the published course dates.

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 3/31/2025

Schedule:

Date Day Start End Location
4/14/2025 Mon 8:00 a.m. 4:30 p.m. UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
4/15/2025 Tue 8:00 a.m. 4:30 p.m. UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
4/16/2025 Wed 8:00 a.m. 4:30 p.m. UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
4/17/2025 Thu 8:00 a.m. 4:30 p.m. UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
Add To Cart

Instructor: Charles Geraci

Charles Geraci

Charles Geraci is in charge of the Facility Safety Program at Pfizer Pharmaceuticals Inc. La Jolla site as well as responsible for the Crisis Management/Business Continuity and Security Programs. Charles has over 20 years of professional experience in the Environmental Health & Safety (EHS) field and received his bachelor's degree in Occupational Safety Sciences from Indiana University of PA.

Full Bio
Add To Cart

Section ID:

188168

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 4/7/2025

Schedule:

Date Day Start End
4/21/2025 Mon 9:00 a.m. 4:30 p.m.
4/22/2025 Tue 9:00 a.m. 4:30 p.m.
4/23/2025 Wed 9:00 a.m. 4:30 p.m.
4/24/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Tim Page-Bottorff, CSP; Certified Instructional Trainer

Tim Page-Bottorff, CSP; Certified Instructional Trainer

UCSD Instructor for 10 Years, Lecturer, Central Washington University

Tim’s career in safety began as a marine in Operation Desert Storm, helping put out oil fires. His time in the military gave him leadership, training, and the ability to connect with people. After leaving the military, Tim became a full-time safety professional, speaker, author, and eventually achieving the CSP designation. Tim is a Board Member of the American Society of Safety Professionals where he was elected as Director at Large. Tim is a Senior Consultant with SafeStart and has his own consulting business.

Tim has a Master’s Degree in Occupational Safety and Health from Central Washington University and a Bachelor’s Degree in Business Management from Arizona State University. He has received the prestigious Safety Professional of the Year (SPY) from the American Society of Safety Professionals and the National Safety Council’s 2018 Distinguished Service to Safety Award (DSSA), the first to be awarded both, and in the same year.

Full Bio
Add To Cart

Section ID:

188266

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 4/28/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed.Dates: 5/12/25-5/15/25

Schedule:

Date Day Start End
5/12/2025 Mon 9:00 a.m. 4:30 p.m.
5/13/2025 Tue 9:00 a.m. 4:30 p.m.
5/14/2025 Wed 9:00 a.m. 4:30 p.m.
5/15/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Kenneth Keberle, CSP; ASP; CHST; CIT

Kenneth Keberle, CSP; ASP; CHST; CIT
Add To Cart

Section ID:

188362

Class type:

This is a traditional classroom setting.

All class meetings held in-person according to published location, dates and times. Students may be expected to engage with course content online during the published course dates.

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 5/5/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 5/19/25-5/22/25

Schedule:

Date Day Start End Location
5/19/2025 Mon 8:00 a.m. 4:30 p.m. UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
5/20/2025 Tue 8:00 a.m. 4:30 p.m. UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
5/21/2025 Wed 8:00 a.m. 4:30 p.m. UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
5/22/2025 Thu 8:00 a.m. 4:30 p.m. UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
Add To Cart

Instructor: Charles Geraci

Charles Geraci

Charles Geraci is in charge of the Facility Safety Program at Pfizer Pharmaceuticals Inc. La Jolla site as well as responsible for the Crisis Management/Business Continuity and Security Programs. Charles has over 20 years of professional experience in the Environmental Health & Safety (EHS) field and received his bachelor's degree in Occupational Safety Sciences from Indiana University of PA.

Full Bio
Add To Cart

Section ID:

188364

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 5/19/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 6/2/25-6/5/25

Schedule:

Date Day Start End
6/2/2025 Mon 9:00 a.m. 4:30 p.m.
6/3/2025 Tue 9:00 a.m. 4:30 p.m.
6/4/2025 Wed 9:00 a.m. 4:30 p.m.
6/5/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: John Marsden, CHST, COSS, CET

John Marsden, CHST, COSS, CET

John has instructed health and safety classes for over 15 years to a wide range of construction crafts all over the country.

John Marsden has been with the UC San Diego OSHA Training Institute Education Center since 2013. He teaches the Safety Leadership courses and OSHA standards and trainer courses.

John's career includes over 20 years as a union steamfitter. He worked mostly as HVAC assistant service manager for 3 different companies over 15 years. Additionally, John is a Nuclear trained Submarine qualified U.S. Navy veteran.

He taught for 20 years as an apprenticeship and journeyman for United Association District Council 16. He also instructed safety and health for United Association as a Master Safety Instructor. John is the owner and lead instructor of Marsden Master Safety Training.

John is a certified Construction Health and Safety Technician (CHST) and a Certified Instructional Trainer (CIT) as well as being a Certified Occupational Safety Specialist (COSS) and Certified Occupational Safety Manager (COSM). John is a NESHA Master Instructor and Master Safety Professional. He has held a California vocational state teaching credential.

Full Bio