Skip to Content

Occupational Safety and Health

OSHA 510 - Occupational Safety and Health Standards for the Construction Industry

FPM-40299

This course covers OSHA Standards, policies, and procedures in the construction industry. Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous. Upon course completion students will have the ability to define construction terms found in the OSHA Construction Standards, identify hazards which occur in the construction industry, locate and determine appropriate OSHA Construction Standards, policies, and procedures, and describe the use of the OSHA Construction Standards and regulations to supplement an ongoing safety and health program.

Course Information

In-Person
Live Online
3.00 units
$795.00
Notes: Beginning September 1, 2024, the VILT (Virtual Instructor Led Training) classes at the UC San Diego OTIEC are available to anyone who lives or works in the newly realigned OSHA San Francisco Region: Alaska, American Samoa, Arizona, California, Commonwealth of the Northern Mariana Islands, Guam, Hawaii, Idaho, Nevada, Oregon and Washington.

Additionally, if you are a current Outreach Trainer with UCSD, regardless of your residence, you are still eligible to attend a Trainer Update Course (OSHA 502, OSHA 503, OSHA 5402).

Course sessions

Closed

Section ID:

181775

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • Early enrollment advised
  • No refunds after: 9/23/2024

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 10/7/24-10/10/24

Schedule:

Date Day Start End
10/7/2024 Mon 9:00 a.m. 4:30 p.m.
10/8/2024 Tue 9:00 a.m. 4:30 p.m.
10/9/2024 Wed 9:00 a.m. 4:30 p.m.
10/10/2024 Thu 9:00 a.m. 4:30 p.m.
Closed

Instructor: John Marsden, CHST, COSS, CET

John Marsden, CHST, COSS, CET

John has instructed health and safety classes for over 15 years to a wide range of construction crafts all over the country.

John Marsden has been with the UC San Diego OSHA Training Institute Education Center since 2013. He teaches the Safety Leadership courses and OSHA standards and trainer courses.

John's career includes over 20 years as a union steamfitter. He worked mostly as HVAC assistant service manager for 3 different companies over 15 years. Additionally, John is a Nuclear trained Submarine qualified U.S. Navy veteran.

He taught for 20 years as an apprenticeship and journeyman for United Association District Council 16. He also instructed safety and health for United Association as a Master Safety Instructor. John is the owner and lead instructor of Marsden Master Safety Training.

John is a certified Construction Health and Safety Technician (CHST) and a Certified Instructional Trainer (CIT) as well as being a Certified Occupational Safety Specialist (COSS) and Certified Occupational Safety Manager (COSM). John is a NESHA Master Instructor and Master Safety Professional. He has held a California vocational state teaching credential.

Full Bio
Closed

Section ID:

181790

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • Early enrollment advised
  • No refunds after: 10/14/2024

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 10/28/24-10/31/24

Schedule:

Date Day Start End
10/28/2024 Mon 9:00 a.m. 4:30 p.m.
10/29/2024 Tue 9:00 a.m. 4:30 p.m.
10/30/2024 Wed 9:00 a.m. 4:30 p.m.
10/31/2024 Thu 9:00 a.m. 4:30 p.m.
Closed

Instructor: Kenneth Keberle, CSP; ASP; CHST; CIT

Kenneth Keberle, CSP; ASP; CHST; CIT
Add To Cart

Section ID:

181823

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • Early enrollment advised
  • No refunds after: 11/19/2024

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 12/03/24-12/06/24

Schedule:

Date Day Start End
12/3/2024 Tue 9:00 a.m. 4:30 p.m.
12/4/2024 Wed 9:00 a.m. 4:30 p.m.
12/5/2024 Thu 9:00 a.m. 4:30 p.m.
12/6/2024 Fri 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Kenneth Keberle, CSP; ASP; CHST; CIT

Kenneth Keberle, CSP; ASP; CHST; CIT
Add To Cart

Section ID:

186497

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 12/31/2024

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 1/14/25-1/17/25

Schedule:

Date Day Start End
1/14/2025 Tue 9:00 a.m. 4:30 p.m.
1/15/2025 Wed 9:00 a.m. 4:30 p.m.
1/16/2025 Thu 9:00 a.m. 4:30 p.m.
1/17/2025 Fri 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has over 30 years occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona. Starting as a compliance officer, Norton worked his way up to assistant director for the agency, with oversight for all training, consulting and voluntary protection programs within Arizona, and compliance activity in the Southern part of the state. Norton is the principle consultant for Norton Safety Services traveling across the country to deliver his message of safety excellence. He is also a published author of two books on Occupational Safety & Health, and has a master’s in organizational management.

Full Bio
Add To Cart

Section ID:

186854

Class type:

This is a traditional classroom setting.

All class meetings held in-person according to published location, dates and times. Students may be expected to engage with course content online during the published course dates.

Textbooks:

All course materials are included unless otherwise stated.

Policies:

Schedule:

Date Day Start End Location
2/3/2025 Mon 8:00 a.m. 4:30 p.m. Room 11, TRN2U, 2200 N. Central Ave. Ste 400, Phoenix
2/4/2025 Tue 8:00 a.m. 4:30 p.m. Room 11, TRN2U, 2200 N. Central Ave. Ste 400, Phoenix
2/5/2025 Wed 8:00 a.m. 4:30 p.m. Room 11, TRN2U, 2200 N. Central Ave. Ste 400, Phoenix
2/6/2025 Thu 8:00 a.m. 4:30 p.m. Room 11, TRN2U, 2200 N. Central Ave. Ste 400, Phoenix
Add To Cart

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has over 30 years occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona. Starting as a compliance officer, Norton worked his way up to assistant director for the agency, with oversight for all training, consulting and voluntary protection programs within Arizona, and compliance activity in the Southern part of the state. Norton is the principle consultant for Norton Safety Services traveling across the country to deliver his message of safety excellence. He is also a published author of two books on Occupational Safety & Health, and has a master’s in organizational management.

Full Bio
Add To Cart

Section ID:

186498

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 1/27/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 2/10/25-2/13/25

Schedule:

Date Day Start End
2/10/2025 Mon 9:00 a.m. 4:30 p.m.
2/11/2025 Tue 9:00 a.m. 4:30 p.m.
2/12/2025 Wed 9:00 a.m. 4:30 p.m.
2/13/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has over 30 years occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona. Starting as a compliance officer, Norton worked his way up to assistant director for the agency, with oversight for all training, consulting and voluntary protection programs within Arizona, and compliance activity in the Southern part of the state. Norton is the principle consultant for Norton Safety Services traveling across the country to deliver his message of safety excellence. He is also a published author of two books on Occupational Safety & Health, and has a master’s in organizational management.

Full Bio
Add To Cart

Section ID:

186861

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 2/4/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 2/18/25-2/21/25

Schedule:

Date Day Start End
2/18/2025 Tue 9:00 a.m. 4:30 p.m.
2/19/2025 Wed 9:00 a.m. 4:30 p.m.
2/20/2025 Thu 9:00 a.m. 4:30 p.m.
2/21/2025 Fri 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Ryan Martinez

Ryan Martinez
From 2006 to 2010, Ryan served in the United States Marines where he deployed as a machine gunner to Fallujah, Iraq, and upon return was selected to lead 1st Maintenance Battalion as the Health and Safety Chief, where he was responsible for the safety and health of over 1,500 Marines, Sailors, and Civilians.

After leaving the service, he worked for multiple safety and health companies as a consultant, traveling the world interfacing with hundreds of clients and thousands of students, performing audits, inspections, training events, and developing resources for clients ranging from Disney, Genentech, AECOM, and P&G.

While working as a consultant, Ryan completed his MBA from the University of Southern California and specialized in corporate strategy and adult education.

In 2015, he founded Surge Consultant Group, which specializes in safety program development, training consultation, and plan review. A few notable clients include Netflix, Paramount Pictures, and the State of California.

He lives in Los Angeles, California.

Full Bio
Add To Cart

Section ID:

186482

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 2/17/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 3/3/25-3/6/25

Schedule:

Date Day Start End
3/3/2025 Mon 9:00 a.m. 4:30 p.m.
3/4/2025 Tue 9:00 a.m. 4:30 p.m.
3/5/2025 Wed 9:00 a.m. 4:30 p.m.
3/6/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Kenneth Keberle, CSP; ASP; CHST; CIT

Kenneth Keberle, CSP; ASP; CHST; CIT
Add To Cart

Section ID:

186494

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 3/10/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 3/24/25-3/27/25

Schedule:

Date Day Start End
3/24/2025 Mon 9:00 a.m. 4:30 p.m.
3/25/2025 Tue 9:00 a.m. 4:30 p.m.
3/26/2025 Wed 9:00 a.m. 4:30 p.m.
3/27/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Kenneth Keberle, CSP; ASP; CHST; CIT

Kenneth Keberle, CSP; ASP; CHST; CIT
Add To Cart

Section ID:

188058

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

Schedule:

No information available at this time.
Add To Cart
Add To Cart

Section ID:

188170

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 4/7/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 4/21/25-4/24/25

Schedule:

Date Day Start End
4/21/2025 Mon 9:00 a.m. 4:30 p.m.
4/22/2025 Tue 9:00 a.m. 4:30 p.m.
4/23/2025 Wed 9:00 a.m. 4:30 p.m.
4/24/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has over 30 years occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona. Starting as a compliance officer, Norton worked his way up to assistant director for the agency, with oversight for all training, consulting and voluntary protection programs within Arizona, and compliance activity in the Southern part of the state. Norton is the principle consultant for Norton Safety Services traveling across the country to deliver his message of safety excellence. He is also a published author of two books on Occupational Safety & Health, and has a master’s in organizational management.

Full Bio