Skip to Content

Occupational Safety and Health

OSHA 511 - Occupational Safety and Health Standards for General Industry

FPM-40366

This course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

Course Information

In-Person
Live Online
3.00 units
$795.00
Notes: Beginning September 1, 2024, the VILT (Virtual Instructor Led Training) classes at the UC San Diego OTIEC are available to anyone who lives or works in the newly realigned OSHA San Francisco Region: Alaska, American Samoa, Arizona, California, Commonwealth of the Northern Mariana Islands, Guam, Hawaii, Idaho, Nevada, Oregon and Washington.

Additionally, if you are a current Outreach Trainer with UCSD, regardless of your residence, you are still eligible to attend a Trainer Update Course (OSHA 502, OSHA 503, OSHA 5402).

Course sessions

Closed

Section ID:

188061

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 3/17/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 3/31/25-4/3/25

Schedule:

Date Day Start End
3/31/2025 Mon 9:00 a.m. 4:30 p.m.
4/1/2025 Tue 9:00 a.m. 4:30 p.m.
4/2/2025 Wed 9:00 a.m. 4:30 p.m.
4/3/2025 Thu 9:00 a.m. 4:30 p.m.
Closed

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has been with UC San Diego OSHA Training Institute Education Center since 2012.

Mark started his safety and health career in 1979 when he joined the United States Coast Guard working as a Hospital Corpsman and Flight Medic, specializing as a Preventive Medicine Technician (safety & health specialist), until a work-related injury ended his military career.

Mark went on to complete a 26-year career with the State of Arizona’s OSHA program where he held positions as a Compliance officer in both Safety and Industrial Hygiene, Safety Consultant, Consultation Manager, VPP Coordinator, and Assistant Director. Mark left ADOSH to work as the Safety & Health Manager for a large water utility, eventually retiring from government service in 2012.

In addition to joining UCSD-OTI in 2012, Mark started a consulting company traveling the country as a consultant, speaker, and trainer, sharing the experience gained, and the lessons learned, from over 4 decades as an Occupational Safety & Health professional.

Mark holds a BS in Business Management and MA in Organizational Management and has published two books on the topic of safety and health management. Mark's work in the safety & health field has been recognized with such honors as the 2008 National VPPPA Chairman’s Award, the 2009 ASSE Southern Arizona Chapter "Safety Professional of the Year" and the Coast Guard Achievement Medal for his work in Occupational Safety & Health. His hobbies include camping, hunting, fishing, photography and traveling with his wife Kassie, and spending time with his children and grandchildren.
 

Full Bio
Add To Cart

Section ID:

188165

Class type:

This is a traditional classroom setting.

All class meetings held in-person according to published location, dates and times. Students may be expected to engage with course content online during the published course dates.

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 3/31/2025

Schedule:

Date Day Start End Location
4/14/2025 Mon 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
4/15/2025 Tue 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
4/16/2025 Wed 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
4/17/2025 Thu 8:00 a.m. 4:30 p.m. Room 313, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
Add To Cart

Instructor: Charles Geraci

Charles Geraci

Charles Geraci is the Regional Security and Business Protection Lead along with his EHS responsibilities for the Pfizer Inc site in La Jolla, CA. Charles has over 30 years of professional experience in the Environmental Health & Safety (EHS) field and received his bachelor’s degree in Occupational Safety Sciences from Indiana University of PA. Charles also has numerous Safety, Security, and Business Continuity certifications. He has been an instructor for the OSHA Training Institute Education Center (OTIEC) for over 10 years with his focus courses being the OSHA 511, 5119, and 501 Outreach Instructor Class. Charles is a very passionate instructor who wishes to impart his EHS wisdom to his students taking his courses.

Full Bio
Add To Cart

Section ID:

188168

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 4/7/2025

Schedule:

Date Day Start End
4/21/2025 Mon 9:00 a.m. 4:30 p.m.
4/22/2025 Tue 9:00 a.m. 4:30 p.m.
4/23/2025 Wed 9:00 a.m. 4:30 p.m.
4/24/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: John Marsden, CHST, COSS, CET

John Marsden, CHST, COSS, CET

John has instructed health and safety classes for over 15 years to a wide range of construction crafts all over the country.

John Marsden has been with the UC San Diego OSHA Training Institute Education Center since 2013. He teaches the Safety Leadership courses and OSHA standards and trainer courses.

John's career includes over 20 years as a union steamfitter. He worked mostly as HVAC assistant service manager for 3 different companies over 15 years. Additionally, John is a Nuclear trained Submarine qualified U.S. Navy veteran.

He taught for 20 years as an apprenticeship and journeyman for United Association District Council 16. He also instructed safety and health for United Association as a Master Safety Instructor. John is the owner and lead instructor of Marsden Master Safety Training.

John is a certified Construction Health and Safety Technician (CHST) and a Certified Instructional Trainer (CIT) as well as being a Certified Occupational Safety Specialist (COSS) and Certified Occupational Safety Manager (COSM). John is a NESHA Master Instructor and Master Safety Professional. He has held a California vocational state teaching credential.

Full Bio
Add To Cart

Section ID:

188266

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 4/28/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed.Dates: 5/12/25-5/15/25

Schedule:

Date Day Start End
5/12/2025 Mon 9:00 a.m. 4:30 p.m.
5/13/2025 Tue 9:00 a.m. 4:30 p.m.
5/14/2025 Wed 9:00 a.m. 4:30 p.m.
5/15/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Kenneth Keberle, CSP, ASP, CHST, CIT

Kenneth Keberle, CSP, ASP, CHST, CIT
Add To Cart

Section ID:

188362

Class type:

This is a traditional classroom setting.

All class meetings held in-person according to published location, dates and times. Students may be expected to engage with course content online during the published course dates.

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 5/5/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 5/19/25-5/22/25

Schedule:

Date Day Start End Location
5/19/2025 Mon 8:00 a.m. 4:30 p.m. Room 208, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
5/20/2025 Tue 8:00 a.m. 4:30 p.m. Room 208, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
5/21/2025 Wed 8:00 a.m. 4:30 p.m. Room 208, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
5/22/2025 Thu 8:00 a.m. 4:30 p.m. Room 208, UCSD Division of Extended Studies University City Center, 6256 Greenwich Drive, San Diego
Add To Cart

Instructor: Charles Geraci

Charles Geraci

Charles Geraci is the Regional Security and Business Protection Lead along with his EHS responsibilities for the Pfizer Inc site in La Jolla, CA. Charles has over 30 years of professional experience in the Environmental Health & Safety (EHS) field and received his bachelor’s degree in Occupational Safety Sciences from Indiana University of PA. Charles also has numerous Safety, Security, and Business Continuity certifications. He has been an instructor for the OSHA Training Institute Education Center (OTIEC) for over 10 years with his focus courses being the OSHA 511, 5119, and 501 Outreach Instructor Class. Charles is a very passionate instructor who wishes to impart his EHS wisdom to his students taking his courses.

Full Bio
Add To Cart

Section ID:

188364

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 5/19/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 6/2/25-6/5/25

Schedule:

Date Day Start End
6/2/2025 Mon 9:00 a.m. 4:30 p.m.
6/3/2025 Tue 9:00 a.m. 4:30 p.m.
6/4/2025 Wed 9:00 a.m. 4:30 p.m.
6/5/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: John Marsden, CHST, COSS, CET

John Marsden, CHST, COSS, CET

John has instructed health and safety classes for over 15 years to a wide range of construction crafts all over the country.

John Marsden has been with the UC San Diego OSHA Training Institute Education Center since 2013. He teaches the Safety Leadership courses and OSHA standards and trainer courses.

John's career includes over 20 years as a union steamfitter. He worked mostly as HVAC assistant service manager for 3 different companies over 15 years. Additionally, John is a Nuclear trained Submarine qualified U.S. Navy veteran.

He taught for 20 years as an apprenticeship and journeyman for United Association District Council 16. He also instructed safety and health for United Association as a Master Safety Instructor. John is the owner and lead instructor of Marsden Master Safety Training.

John is a certified Construction Health and Safety Technician (CHST) and a Certified Instructional Trainer (CIT) as well as being a Certified Occupational Safety Specialist (COSS) and Certified Occupational Safety Manager (COSM). John is a NESHA Master Instructor and Master Safety Professional. He has held a California vocational state teaching credential.

Full Bio
Add To Cart

Section ID:

190014

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 6/23/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 7/7/25-7/10/25

Schedule:

Date Day Start End
7/7/2025 Mon 9:00 a.m. 4:30 p.m.
7/8/2025 Tue 9:00 a.m. 4:30 p.m.
7/9/2025 Wed 9:00 a.m. 4:30 p.m.
7/10/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Shawn O'Brien

Shawn O'Brien
Add To Cart

Section ID:

190060

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 7/14/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 7/28/25-7/31/25

Schedule:

Date Day Start End
7/28/2025 Mon 9:00 a.m. 4:30 p.m.
7/29/2025 Tue 9:00 a.m. 4:30 p.m.
7/30/2025 Wed 9:00 a.m. 4:30 p.m.
7/31/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: John Marsden, CHST, COSS, CET

John Marsden, CHST, COSS, CET

John has instructed health and safety classes for over 15 years to a wide range of construction crafts all over the country.

John Marsden has been with the UC San Diego OSHA Training Institute Education Center since 2013. He teaches the Safety Leadership courses and OSHA standards and trainer courses.

John's career includes over 20 years as a union steamfitter. He worked mostly as HVAC assistant service manager for 3 different companies over 15 years. Additionally, John is a Nuclear trained Submarine qualified U.S. Navy veteran.

He taught for 20 years as an apprenticeship and journeyman for United Association District Council 16. He also instructed safety and health for United Association as a Master Safety Instructor. John is the owner and lead instructor of Marsden Master Safety Training.

John is a certified Construction Health and Safety Technician (CHST) and a Certified Instructional Trainer (CIT) as well as being a Certified Occupational Safety Specialist (COSS) and Certified Occupational Safety Manager (COSM). John is a NESHA Master Instructor and Master Safety Professional. He has held a California vocational state teaching credential.

Full Bio
Add To Cart

Section ID:

190116

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 8/4/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 8/18/25-8/21/25

Schedule:

Date Day Start End
8/18/2025 Mon 9:00 a.m. 4:30 p.m.
8/19/2025 Tue 9:00 a.m. 4:30 p.m.
8/20/2025 Wed 9:00 a.m. 4:30 p.m.
8/21/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has been with UC San Diego OSHA Training Institute Education Center since 2012.

Mark started his safety and health career in 1979 when he joined the United States Coast Guard working as a Hospital Corpsman and Flight Medic, specializing as a Preventive Medicine Technician (safety & health specialist), until a work-related injury ended his military career.

Mark went on to complete a 26-year career with the State of Arizona’s OSHA program where he held positions as a Compliance officer in both Safety and Industrial Hygiene, Safety Consultant, Consultation Manager, VPP Coordinator, and Assistant Director. Mark left ADOSH to work as the Safety & Health Manager for a large water utility, eventually retiring from government service in 2012.

In addition to joining UCSD-OTI in 2012, Mark started a consulting company traveling the country as a consultant, speaker, and trainer, sharing the experience gained, and the lessons learned, from over 4 decades as an Occupational Safety & Health professional.

Mark holds a BS in Business Management and MA in Organizational Management and has published two books on the topic of safety and health management. Mark's work in the safety & health field has been recognized with such honors as the 2008 National VPPPA Chairman’s Award, the 2009 ASSE Southern Arizona Chapter "Safety Professional of the Year" and the Coast Guard Achievement Medal for his work in Occupational Safety & Health. His hobbies include camping, hunting, fishing, photography and traveling with his wife Kassie, and spending time with his children and grandchildren.
 

Full Bio
Add To Cart

Section ID:

190134

Class type:

Synchronous web-based class meetings that are scheduled to meet online at published times (time/date).

Textbooks:

All course materials are included unless otherwise stated.

Policies:

  • No refunds after: 8/25/2025

Note:

Virtual Instructor Led Training (VILT) classes are overseen with the same guidelines & policies as in-person offerings. Per OSHA guidelines, students are required to have video capabilities and must be visible at all times.If a student cannot comply with this requirement they will not be able to attend class. Students are required to attend all days/times to receive a completion certificate and/or trainer card and must participate via computer. Phones & tablets are not allowed. Dates: 9/8/25-9/11/25

Schedule:

Date Day Start End
9/8/2025 Mon 9:00 a.m. 4:30 p.m.
9/9/2025 Tue 9:00 a.m. 4:30 p.m.
9/10/2025 Wed 9:00 a.m. 4:30 p.m.
9/11/2025 Thu 9:00 a.m. 4:30 p.m.
Add To Cart

Instructor: Mark Norton, MAOM, RSP,CSSM

Mark Norton, MAOM, RSP,CSSM

Over 30 years of occupational safety and health experience, 24 of which were spent working for State OSHA in Arizona.

Mark Norton has been with UC San Diego OSHA Training Institute Education Center since 2012.

Mark started his safety and health career in 1979 when he joined the United States Coast Guard working as a Hospital Corpsman and Flight Medic, specializing as a Preventive Medicine Technician (safety & health specialist), until a work-related injury ended his military career.

Mark went on to complete a 26-year career with the State of Arizona’s OSHA program where he held positions as a Compliance officer in both Safety and Industrial Hygiene, Safety Consultant, Consultation Manager, VPP Coordinator, and Assistant Director. Mark left ADOSH to work as the Safety & Health Manager for a large water utility, eventually retiring from government service in 2012.

In addition to joining UCSD-OTI in 2012, Mark started a consulting company traveling the country as a consultant, speaker, and trainer, sharing the experience gained, and the lessons learned, from over 4 decades as an Occupational Safety & Health professional.

Mark holds a BS in Business Management and MA in Organizational Management and has published two books on the topic of safety and health management. Mark's work in the safety & health field has been recognized with such honors as the 2008 National VPPPA Chairman’s Award, the 2009 ASSE Southern Arizona Chapter "Safety Professional of the Year" and the Coast Guard Achievement Medal for his work in Occupational Safety & Health. His hobbies include camping, hunting, fishing, photography and traveling with his wife Kassie, and spending time with his children and grandchildren.
 

Full Bio